Searching for cut-outs : 2 results found | RSS Feed for this search

TALAT Lecture 2301: Design of Members

Description

This lecture gives background to calculation methods for aluminium members in order to understand the specific behavior of statically loaded aluminium alloy structures. Basic structural mechanic, design philosophy and structural aluminium alloys and product forms is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | member | joint | static | safety | serviceability | geometrical imperfections | extruded profiles | welded profiles | residual stresses | mechanical properties | bauschinger effect | heat affected zones | stress-strain relationship | strength | reduced strength | partial coefficients | resistance factors | gross section | net section | local buckling | cross section classes | slender plates | effective cross section | class 4 cross sections | deflections of beams | breathing | bending moment | yielding | slenderness parameter | element classification | effective thickness | welded section | section with holes | lateral torsional buckling | axial force | tensile force | compressive force | euler load | squash load | flexural buckling | reduction factor | buckling length | splices | end connections | welded columns | columns with bolt holes | cut-outs | longitudinal welds | transverse welds | columns with unfilled bolt-holes | built-up members | intermediate stiffeners | edge stiffeners | single-sided rib | multi-stiffened plates | orthotropic plates | shear force | plate girder webs | shear buckling | shear resistance | webs with stiffeners | plate girders with intermediate stiffeners | corrugated webs | closely stiffened webs | concentrated loads | beam webs without stiffeners | beam webs with stiffeners | shear centre | closed sections | open sections | torsion without warping | torsion with warpin | bending and axial tension | bending and axial compression | strength of beam-column segments | rectangular section | strain hardening | plastic theory | i-section | h-section | thin walled cross sections | t-section | biaxial bending | linear stress distribution | shear lag | flange curling | lateral deflection | non-symmetrical flanges | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2301: Design of Members

Description

This lecture gives background to calculation methods for aluminium members in order to understand the specific behavior of statically loaded aluminium alloy structures. Basic structural mechanic, design philosophy and structural aluminium alloys and product forms is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | product | member | joint | static | safety | serviceability | geometrical imperfections | extruded profiles | welded profiles | residual stresses | mechanical properties | Bauschinger effect | heat affected zones | stress-strain relationship | strength | reduced strength | partial coefficients | resistance factors | gross section | net section | local buckling | cross section classes | slender plates | effective cross section | class 4 cross sections | deflections of beams | breathing | bending moment | yielding | slenderness parameter | element classification | effective thickness | welded section | section with holes | lateral torsional buckling | axial force | tensile force | compressive force | Euler load | squash load | flexural buckling | reduction factor | buckling length | splices | end connections | welded columns | columns with bolt holes | cut-outs | longitudinal welds | transverse welds | columns with unfilled bolt-holes | built-up members | intermediate stiffeners | edge stiffeners | single-sided rib | multi-stiffened plates | orthotropic plates | shear force | plate girder webs | shear buckling | shear resistance | webs with stiffeners | plate girders with intermediate stiffeners | corrugated webs | closely stiffened webs | concentrated loads | beam webs without stiffeners | beam webs with stiffeners | shear centre | closed sections | open sections | torsion without warping | torsion with warpin | bending and axial tension | bending and axial compression | strength of beam-column segments | rectangular section | strain hardening | plastic theory | I-section | H-section | thin walled cross sections | T-section | biaxial bending | linear stress distribution | shear lag | flange curling | lateral deflection | non-symmetrical flanges | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata