Searching for ductility : 9 results found | RSS Feed for this search

2.002 Mechanics and Materials II (MIT) 2.002 Mechanics and Materials II (MIT)

Description

This course provides Mechanical Engineering students with an awareness of various responses exhibited by solid engineering materials when subjected to mechanical and thermal loadings; an introduction to the physical mechanisms associated with design-limiting behavior of engineering materials, especially stiffness, strength, toughness, and durability; an understanding of basic mechanical properties of engineering materials, testing procedures used to quantify these properties, and ways in which these properties characterize material response; quantitative skills to deal with materials-limiting problems in engineering design; and a basis for materials selection in mechanical design. This course provides Mechanical Engineering students with an awareness of various responses exhibited by solid engineering materials when subjected to mechanical and thermal loadings; an introduction to the physical mechanisms associated with design-limiting behavior of engineering materials, especially stiffness, strength, toughness, and durability; an understanding of basic mechanical properties of engineering materials, testing procedures used to quantify these properties, and ways in which these properties characterize material response; quantitative skills to deal with materials-limiting problems in engineering design; and a basis for materials selection in mechanical design.

Subjects

beam bending | beam bending | buckling | buckling | vibration | vibration | polymers | polymers | viscoelasticity | viscoelasticity | strength | strength | ductility | ductility | stress | stress | stress concentration | stress concentration | sheet bending | sheet bending | heat treatment | heat treatment | fracture | fracture | plasticity | plasticity | creep | creep | fatigue | fatigue | solid materials | solid materials | mechanical loading | mechanical loading | thermal loading | thermal loading | design-limiting behavior | design-limiting behavior | stiffness | stiffness | toughness | toughness | durability | durability | engineering materials | engineering materials | materials-limiting problem | materials-limiting problem | materials selection | materials selection

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.40J Physical Metallurgy (MIT) 3.40J Physical Metallurgy (MIT)

Description

The central point of this course is to provide a physical basis that links the structure of materials with their properties, focusing primarily on metals. With this understanding in hand, the concepts of alloy design and microstructural engineering are also discussed, linking processing and thermodynamics to the structure and properties of metals. The central point of this course is to provide a physical basis that links the structure of materials with their properties, focusing primarily on metals. With this understanding in hand, the concepts of alloy design and microstructural engineering are also discussed, linking processing and thermodynamics to the structure and properties of metals.

Subjects

point | point | line and interfacial defects | line and interfacial defects | stereographic projection | stereographic projection | annealing | annealing | spinodal decomposition | spinodal decomposition | nucleation | nucleation | growth | growth | particle coarsening | particle coarsening | structure-function relationships | structure-function relationships | interstitial and substitutional solid solutions | interstitial and substitutional solid solutions | processing and structure of metals | processing and structure of metals | strength | strength | stiffness | stiffness | and ductility | and ductility | crystallography | crystallography | phase transformations | phase transformations | microstructural evolution | microstructural evolution | steel | steel | aluminum | aluminum

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses-3.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.14 Physical Metallurgy (MIT) 3.14 Physical Metallurgy (MIT)

Description

The central point of this course is to provide a physical basis that links the structure of metals with their properties. With this understanding in hand, the concepts of alloy design and microstructural engineering are also discussed, linking processing and thermodynamics to the structure and properties of metals. The central point of this course is to provide a physical basis that links the structure of metals with their properties. With this understanding in hand, the concepts of alloy design and microstructural engineering are also discussed, linking processing and thermodynamics to the structure and properties of metals.

Subjects

processing | structure | and properties of metals and alloys | processing | structure | and properties of metals and alloys | strength | stiffness | and ductility | strength | stiffness | and ductility | crystallography | defects | microstructure | crystallography | defects | microstructure | phase transformations | phase transformations | microstructural evolution | microstructural evolution | alloy thermodynamics and kinetics | alloy thermodynamics and kinetics | structural engineering alloys | structural engineering alloys | steel | steel | aluminum | aluminum

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allarchivedcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Structures and materials : section 4 behaviour of materials : presentation transcript

Description

This open educational resource was released through the Higher Education Academy Engineering Subject Centre Open Engineering Resources Pilot project. The project was funded by HEFCE and the JISC/HE Academy UKOER programme.

Subjects

ukoer | engscoer | cc-by | engcetl | loughborough university | higher education | learning | loughboroughunioer | engineering | tta104 | behaviour of materials | line defects | stress-strain relationship | plasticity | constant volume | deformations | ductility index | stress | tangent modulus | strain | elasticity | materials | secant modulus | stress-strain | Engineering | H000

License

Attribution 2.0 UK: England & Wales Attribution 2.0 UK: England & Wales http://creativecommons.org/licenses/by/2.0/uk/ http://creativecommons.org/licenses/by/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

2.002 Mechanics and Materials II (MIT)

Description

This course provides Mechanical Engineering students with an awareness of various responses exhibited by solid engineering materials when subjected to mechanical and thermal loadings; an introduction to the physical mechanisms associated with design-limiting behavior of engineering materials, especially stiffness, strength, toughness, and durability; an understanding of basic mechanical properties of engineering materials, testing procedures used to quantify these properties, and ways in which these properties characterize material response; quantitative skills to deal with materials-limiting problems in engineering design; and a basis for materials selection in mechanical design.

Subjects

beam bending | buckling | vibration | polymers | viscoelasticity | strength | ductility | stress | stress concentration | sheet bending | heat treatment | fracture | plasticity | creep | fatigue | solid materials | mechanical loading | thermal loading | design-limiting behavior | stiffness | toughness | durability | engineering materials | materials-limiting problem | materials selection

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 1501: Properties, Characteristics and Alloys of Aluminium

Description

This lecture provides a survey of the aluminium alloys available to the user; it describes their various properties; it gives an insight into the choice of aluminium for a proposed application. In the context of this lecture not every individual alloy and its properties have been treated in detail, but rather divided into alloy types with reference to the most commonly used alloys. For further details on alloy properties the reader is referred to available databanks like ALUSELECT of the European Aluminium Association (EAA) or to the European and national materials standards. Good engineering background in materials, design and manufacturing processes is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | properties | selection criteria | production | industry | recycled aluminium | secondary aluminium | atomic structure | crystal structure | density | electrical conductivity | resistivity | thermal conductivity | reflectance | non-magnetic | emissivity | corrosion resistance | thermal expansion | melting temperature | latent heat | specific heat | identification | aluminium - copper alloys | aluminium - manganese alloys | aluminium - silicon alloys | aluminium - magnesium alloys | aluminium - magnesium - silicon alloys | aluminium - zinc - magnesium alloys | aluminium - zinc - magnesium - copper alloys | ingot | casting | work hardening | dispersion hardening | solid solution hardening | precipitation hardening | temper designations | non heat-treatable alloys | heat-treatable alloys | applications | mechanical properties | tensile strength | strength/weight ratio | proof stress | elastic properties | elongation | compression | bearing | shear | hardness | ductility | creep | impact strength | elevated temperatures | low temperatures | fracture characteristics | fatigue | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.14 Physical Metallurgy (MIT)

Description

The central point of this course is to provide a physical basis that links the structure of metals with their properties. With this understanding in hand, the concepts of alloy design and microstructural engineering are also discussed, linking processing and thermodynamics to the structure and properties of metals.

Subjects

processing | structure | and properties of metals and alloys | strength | stiffness | and ductility | crystallography | defects | microstructure | phase transformations | microstructural evolution | alloy thermodynamics and kinetics | structural engineering alloys | steel | aluminum

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allarchivedcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.40J Physical Metallurgy (MIT)

Description

The central point of this course is to provide a physical basis that links the structure of materials with their properties, focusing primarily on metals. With this understanding in hand, the concepts of alloy design and microstructural engineering are also discussed, linking processing and thermodynamics to the structure and properties of metals.

Subjects

point | line and interfacial defects | stereographic projection | annealing | spinodal decomposition | nucleation | growth | particle coarsening | structure-function relationships | interstitial and substitutional solid solutions | processing and structure of metals | strength | stiffness | and ductility | crystallography | phase transformations | microstructural evolution | steel | aluminum

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 1501: Properties, Characteristics and Alloys of Aluminium

Description

This lecture provides a survey of the aluminium alloys available to the user; it describes their various properties; it gives an insight into the choice of aluminium for a proposed application. In the context of this lecture not every individual alloy and its properties have been treated in detail, but rather divided into alloy types with reference to the most commonly used alloys. For further details on alloy properties the reader is referred to available databanks like ALUSELECT of the European Aluminium Association (EAA) or to the European and national materials standards. Good engineering background in materials, design and manufacturing processes is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | properties | selection criteria | production | industry | recycled aluminium | secondary aluminium | atomic structure | crystal structure | density | electrical conductivity | resistivity | thermal conductivity | reflectance | non-magnetic | emissivity | corrosion resistance | thermal expansion | melting temperature | latent heat | specific heat | identification | aluminium - copper alloys | aluminium - manganese alloys | aluminium - silicon alloys | aluminium - magnesium alloys | aluminium - magnesium - silicon alloys | aluminium - zinc - magnesium alloys | aluminium - zinc - magnesium - copper alloys | ingot | casting | work hardening | dispersion hardening | solid solution hardening | precipitation hardening | temper designations | non heat-treatable alloys | heat-treatable alloys | applications | mechanical properties | tensile strength | strength/weight ratio | proof stress | elastic properties | elongation | compression | bearing | shear | hardness | ductility | creep | impact strength | elevated temperatures | low temperatures | fracture characteristics | fatigue | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata