Searching for fastening : 46 results found | RSS Feed for this search

1 2

TALAT Lecture 4101: Definition and Classification of Mechanical Fastening Methods

Description

This lecture introduces the principal types of mechanical fastening methods, i.e. screw joints, folding, riveting and clinching by definitions and classification; it illustrates the great variety of types of mechanical fastening methods and systems available for joining aluminium parts. General mechanical engineering background is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | thin-walled components | fabrication | joints | screw joints | thin sheets | flow-drilling screws | folding | straight-edged sheets | overlaps in folded joints | riveting | indirect riveting | rivet forms | blind rivet | fastening elements | clinching | local incision | car door aggregate carrier | technological characteristics | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4103: Self-Piercing Riveting

Description

This lecture describes the processes of self-piercing riveting, which is a relatively new fastening method for sheet metal parts. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lecture 4101 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | self-piercing riveting | indirect self-piercing riveting | direct self-piercing riveting | joining element | half-hollow rivet | solid rivet | fastening technologies | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4106: Quality Assurance and Process Control

Description

This lecture describes the basic methods of quality assurance and process control for mechanical fastening methods. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lectures 4101- 4105 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | quality assurance | direct process control | statistical process control | mechanical fastening process | characteristic deformation diagram | blind rivet | controlling process | limiting values | force-motion studies | clinching | local incision | cross-section | clinch joint | joint geometry | process analysis | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4101: Definition and Classification of Mechanical Fastening Methods

Description

This lecture introduces the principal types of mechanical fastening methods, i.e. screw joints, folding, riveting and clinching by definitions and classification; it illustrates the great variety of types of mechanical fastening methods and systems available for joining aluminium parts. General mechanical engineering background is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | thin-walled components | fabrication | joints | screw joints | thin sheets | flow-drilling screws | folding | straight-edged sheets | overlaps in folded joints | riveting | indirect riveting | rivet forms | blind rivet | fastening elements | clinching | local incision | car door aggregate carrier | technological characteristics | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4103: Self-Piercing Riveting

Description

This lecture describes the processes of self-piercing riveting, which is a relatively new fastening method for sheet metal parts. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lecture 4101 is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | self-piercing riveting | indirect self-piercing riveting | direct self-piercing riveting | joining element | half-hollow rivet | solid rivet | fastening technologies | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4106: Quality Assurance and Process Control

Description

This lecture describes the basic methods of quality assurance and process control for mechanical fastening methods. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lectures 4101- 4105 is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | quality assurance | direct process control | statistical process control | mechanical fastening process | characteristic deformation diagram | blind rivet | controlling process | limiting values | force-motion studies | clinching | local incision | cross-section | clinch joint | joint geometry | process analysis | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2302: Design of Joints

Description

This lecture provides a view of types of joints in aluminium structures and how to design and calculate frequently used joints. Basic structural mechanics and knowledge of design philosophy, structural aluminium alloys and product forms is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | member | joint | static | welding | screws | bolts | riveting | solid state welding | special mechanical joints | joints in thin-walled structures | thread forming screws | blind rivets | cartridge fired pin connections | spot welding | adhesive bonded connections | fasteners | mechanical properties | connections | friction type bolt joints | fastenings | failure modes | deformation | spot welds | design strength | hole bearing | tilting | sheet tearing | edge failure | tension | shear | tensile failure | pull-through failure | pull-over failure | pull-out failure | lap joints | pin connections | heat affected zone | butt welds | fillet welds | ultimate limit state | welded connections | strength | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4102: Clinching

Description

This lecture describes the detailed processes of single-step and multiple-step clinching; it shows the differences of the various clinching methods concerning the amount of shearing; it illustrates the major differences in mechanical properties of clinch joints compared with resistance spot welds. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lecture 4101 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | clinching | local incision | classification | tools | single-step clinching | two-step clinching | multi-step clinching | geometry | spot welded joints | properties | die with movable parts | die without movable parts | flat clinch element | formed parts | holding systems | stripping systems | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4104: Application Characteristics

Description

This lecture describes the parameters governing performance of rivet and clinch joints. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lectures 4101- 4103 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | design | riveting | edges | rivet diameters | riveted joint | corrosion prevention | composite joints | clinching tool | strength | operational life | material surface | shear-tensile testing | dynamic reversed loading | geometry | quasi-statically loaded | multiple-point joints | fatigue tests | impact testing | flanged double-c-channels | cost comparison | steel | sheets | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4105: Combination of Joining Methods

Description

This lecture describes the combination of mechanical joining with adhesive bonding with respect to application criteria, productions considerations and resultant properties. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lectures 4101- 4104 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | classification | combined joints | elementary joints | adhesive joining | fold-adhesive joints | aircraft industry | material locking joints | form locking joints | shear testing | fractured surface | production | adhesive-clinch joint combination | technical operations | clinched joints | adhesives | combined joining technologies | fatigue tests | mechanical properties | impact strength | shear strength | ageing | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4107: General Summary and Future Trends

Description

This lecture points out the need of data sources for designing mechanical joints; it describes concepts for FEM-Modelling of mechanical joints. General mechanical engineering background and familiarity with the subject matter covered in TALAT This lectures 4101- 4106 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | technological data base | input mask | component design | fem-modelling | fatigue strength | self-piercing riveted joint | shear loading | 3-d loading | quasi-static loading | clinch joint | single-step clinching process | local incision | diagram | application | design | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4201: Arc welding processes: TIG, Plasma arc, MIG

Description

This lecture describes the arc welding processes TIG, Plasma, MIG and their modifications in connection with aluminium; it explains the choice of welding parameters; it demonstrates influence of the process on macrostructure. General engineering background and basic knowledge in electrical engineering is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | gas-shielded arc welding | tig welding | equipment | watercooled | torch | shielding gases | flow meter | current | inert gas | argon consumption | tungsten electrodes | weld pool | arc burning | alternating current | filter condenser | pulsating square-wave alternating current | welding parameters | manual tig welding | mechanised tig welding | macrostructure | plasma arc welding | heat affected zone | arc form | keyhole plasma arc welding | arc stabilities | positive polarity plasma arc welding | vppa welding | plasma arc cutting | metal inert gas welding | tig | manual mig welding | contact tube distance | penetration | pulsed current | thick-wire mig welding | deposit efficiency | narrow-gap mig welding | plasma-arc mig welding | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4202: Weldability

Description

This lecture describes the important factors governing weldability of aluminium, such as influence of alloying elements, combinations of base material and filler materials and edge preparation for welding. Basic knowledge in metallurgy of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | weld cracking sensitivity | weldability | solidification | houldcroft test | 6013 t6 alloy | almgsicu | al-si alloys | al-mg alloys | wrought alloys | melting | solidification range | solidification intervals | pre-heating | filler metals | joint vicinity | surface preparation | tig welding | mig welding | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4203: Weld Imperfections

Description

This lecture illustrates the type of weld imperfections and their causes and corrections. Basic knowledge in metallurgy of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | external irregularities | butt welds | misalignment of edges | internal irregularities | gas absorption | hydrogen content | porosity | formation of pores | pore forming zone | tig welds | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4204: Design Aspects

Description

This lecture describes the effects of welding on the materials' strength characteristic. Basic knowledge in metallurgy of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | joining | fastening | mechanical | arc welding | material characteristics | heat-affected zone | almg4 | 5mn | strength | ageing | welded joints | productivity | shielding gases | cost | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4205: Testing Methods for Welded Joints

Description

This lecture gives information about the relevant non-destructive and destructive testing methods for aluminium welded joints. Background in production welding and quality assurance is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | testing methods | welded joints | non-destructive testing | ndt | x-ray catalogue | destructive testing | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4206: Qualification

Description

This lecture explains rules of EN 287-2 and EN 288-4; it describes importance of health and safety issues. Some knowledge of standards is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | welding personnel qualification | en 287-2 | welding process qualification | en 287 | en 288 | testing | health and safety | formation of ozone | ventilation | short-term effects of ozone | airing | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4300: Beam Welding Processes of Aluminium

Description

This lecture gives a brief introduction to beam welding and cutting techniques of aluminium; it describes the process principle of electron and laser beam welding and cutting of aluminium; it gives some information about the choice of welding and cutting parameters; it also gives information about the weldability of aluminium alloys with electron beam welding. General mechanical engineering background and basic knowledge of electron and laser beam physics is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | beam welding | electron beam welding | deep welding process | butt joints | electron beam weldability | rate of vaporisation | 7050 alloy | alznmgcu | tensile strength | solid-state laser | laser welding | laser gas-jet cutting | laser cutting diagram | laser beam cutting | plasma cutting | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4400: Introduction to Friction, Explosive and Ultrasonic Welding Processes of Aluminium

Description

This lecture gives a brief introduction to friction, explosive and ultrasonic welding techniques of aluminium; it describes the possibilities and results of joining aluminium to different metals, e.g. stainless steel. General mechanical engineering background and basic knowledge in aluminium metallurgy is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | friction welding | explosive welding | ultrasonic welding | feasibility | tensile strength | aluminium-steel joints | hardness curves | al-cr-ni-steel joint | friction welding parameters | macrostructure | joint forms | material combinations | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4500: Resistance Welding

Description

This lecture describes the spot welding characteristics of aluminium and its alloys, the spot welding process, the choice of process parameters, strength values, electrode life and ?requirements for quality assurance. General engineering background and knowledge in aluminium metallurgy and physical properties, and surface characteristics (e.g. TALAT lecture 5101) is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | resistance welding | spot welding | physical properties | steel | resistance | oxide film | surface pretreatment | contact resistance | storage time | peltier effect | spot welding machines | relative voltage drop | resistance welding machine | life of electrodes | machine design | current type | current-force diagram | welding parameters | weld spot diameter | direct current | shear strength | weld strengthrepeated tensile stress fatigue strength | fatigue tests | engineering parts | fatigue strength | 2024cl sheets | quality assurance | imperfections | aeronautical standards | metallography | x-ray analysis | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4601: Introduction to Brazing of Aluminium Alloys

Description

This lecture describes the characteristics of brazing aluminium and the process involved; it helps to understand the use potential and the limitations of brazing aluminium. Basic knowledge of aluminium alloys designation system, surface treatment and corrosion behaviour is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | brazing | soldering | bonding | joint design | fixture design | pre-braze cleaning | oxide removal | brazeable alloys | torch brazing | flux-dip brazing | furnace brazing | vacuum brazing | controlled atmosphere brazingbrazing filler metals | fluxes | mechanical properties | brazed joints | microstructure | corrosion | quality control | non-destructive testing | assembly tests | destructive testing | automotive heat exchangers | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4701: Terms and Definitions for Adhesive Bonding

Description

This lecture defines the terms and definition of adhesive bonding of metals; it describes the basic physical/chemical characteristics of adhesive bonding; it also describes the characteristics and the properties of adhesives used in metal bonding. General background in production engineering and material science, some knowledge of the physics and chemistry of metallic surfaces and polymer science is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | adhesive bonding | load distribution | adhesive joint | adhesion | cohesion | deposition of macromolecules on surfaces | bond types | bond forces | dipole bonds | hydrogen bonds | failure | classification | physically bonding adhesives | chemically reacting adhesives | forming reaction | polymer structure | structure | properties | duromeres | amorphous thermoplastics | partly crystalline thermoplastics | alcumg2 | epoxy resin adhesive | stress-strain curve | creep | creep strength | temperature stability | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4702: Factors Influencing the Strength of Adhesive Joints

Description

This lecture describes the factors governing the strength of adhesive joints in order to appreciate these factors for the design of adhesively bonded joints, i.e. geometry of joint, stiffness and strength of the adjoining parts, stress distribution in the adhesive layer as well as the effects of humidity and ageing. General background in production engineering and material science, some knowledge of mechanics and polymer science is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | adhesive bonding | strength | design | stress distributions | lap joints | load distribution | adhesive sheet joints | brittle adhesive layer | elastic-plastic adhesive layer | peeling | geometric parameters | overlapping | overlap length | joining part elongation | stiffness | adhesive strength | joining part thickness | strength of joint parts | ageing | stress | humidity | alloy 6060 - t6 | fatigue strength | deformation behaviour | repeated stress | number of cycles | adhesive layers | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4703: Design and Calculation of Adhesive Joints

Description

This lecture describes the basic types of loadings of adhesive joints and to give examples of recommended joint designs; it shows how to calculate the strength of adhesive joints. General background in production engineering and material science, some knowledge of mechanics and polymer science is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | adhesive bonding | design | adhesive joints | loading | geometry | calculation | adhesive joint strength | application | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4704: Surface Preparation and Application Procedures

Description

This lecture describes the important aspects of surface preparation and pretreatments for adhesive joining of aluminium parts; it illustrates the methods and equipment necessary to obtain good adhesive bonds. General background in production engineering and material science, some knowledge of mechanics and polymer science is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | adhesive bonding | surface preparation | surface layers | surface pretreatment | adhesive strength | surface roughness | applying adhesives | working adhesives | adhesive joint strength | adhesive layer | pressure application | hardening temperature | hardening time | equipment | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata