Searching for loads : 35 results found | RSS Feed for this search

1

TALAT Lecture 2204: Design Philosophy

Description

This lecture outlines the requirements on load bearing structures with respect to safety against failure; it introduces the design analysis process with methods of verification and partial safety factors; it describes the characteristic of loads and load combinations on structures; it introduces the subject of load and resistance factors in the verification methods; it describes the basic structural design properties of aluminium alloys versus steel. Some background and experience in structural engineering and design calculations; basic understanding of the physical and mechanical properties of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | structural design | load carrying structure | safety | serviceability | limit states | economic considerations | verification | load and resistance design factor method | method of allowable stresses | characteristic loads | normal loads | long-term loads | load combinations | design value of the load | buildings | bridges | hydraulic structures | resistance | strength properties | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2710: Static Design Example

Description

Example of structure design of the industrial building developed with the Mathcad software.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | load combinations | loads effects | loads per unit length | concentrated loads | finite element calculations | section forces | design moment | shear forces | deflections | code checking | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2711: Design of a Helicopter Deck

Description

This lecture presents design of the main structural parts of an aluminium alloy helicopter deck. The design of a bolted connection on the supporting structure is also presented.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | loads | permanent loads | live loads | load combination | deck extrusion | support structure | girder connection | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2204: Design Philosophy

Description

This lecture outlines the requirements on load bearing structures with respect to safety against failure; it introduces the design analysis process with methods of verification and partial safety factors; it describes the characteristic of loads and load combinations on structures; it introduces the subject of load and resistance factors in the verification methods; it describes the basic structural design properties of aluminium alloys versus steel. Some background and experience in structural engineering and design calculations; basic understanding of the physical and mechanical properties of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | product | structural design | load carrying structure | safety | serviceability | limit states | economic considerations | verification | load and resistance design factor method | method of allowable stresses | characteristic loads | normal loads | long-term loads | load combinations | design value of the load | buildings | bridges | hydraulic structures | resistance | strength properties | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2710: Static Design Example

Description

Example of structure design of the industrial building developed with the Mathcad software.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | load combinations | loads effects | loads per unit length | concentrated loads | finite element calculations | section forces | design moment | shear forces | deflections | code checking | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2711: Design of a Helicopter Deck

Description

This lecture presents design of the main structural parts of an aluminium alloy helicopter deck. The design of a bolted connection on the supporting structure is also presented.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | loads | permanent loads | live loads | load combination | deck extrusion | support structure | girder connection | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

16.851 Satellite Engineering (MIT) 16.851 Satellite Engineering (MIT)

Description

Satellite Engineering introduces students to subsystem design in engineering spacecraft. The course presents characteristic subsystems, such as power, structure, communication and control, and analyzes the engineering trades necessary to integrate subsystems successfully into a satellite. Discussions of spacecraft operating environment and orbital mechanics help students to understand the functional requirements and key design parameters for satellite systems. Satellite Engineering introduces students to subsystem design in engineering spacecraft. The course presents characteristic subsystems, such as power, structure, communication and control, and analyzes the engineering trades necessary to integrate subsystems successfully into a satellite. Discussions of spacecraft operating environment and orbital mechanics help students to understand the functional requirements and key design parameters for satellite systems.

Subjects

satellites | satellites | satellite engineering | satellite engineering | subsystems | subsystems | satellite design | satellite design | launch systems | launch systems | space environment | space environment | payloads | payloads | orbital mechanics | orbital mechanics | spacecraft mission design | spacecraft mission design | spacecraft | spacecraft | attitude determination | attitude determination | attitude control | attitude control | propulsion | propulsion | thermal systems | thermal systems | ground systems | ground systems | optics | optics | autonomy | autonomy | integrated concurrent engineering | integrated concurrent engineering | power subsystems | power subsystems | GPS | GPS | navigation | navigation | avionics | avionics | ISS operations | ISS operations | satellite tool kit | satellite tool kit | STK | STK

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2713: Fire Design Example

Description

Example of fire design of the industrial building. This is a fully documented calculation example with direct reference to the actual code provisions. It is based on European Standard ENV 1999-2 (Eurocode 9)

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | static loads | fire loads | static design | thermal calculations | code checking | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Aerospace Structures Aerospace Structures

Description

The course on Aerospace Structures gives an overview of the analysis and calculus of lightweight structures. This course is dealing with structural design and stress analysis of thin-walled beams, plates and composite estructures. The course on Aerospace Structures gives an overview of the analysis and calculus of lightweight structures. This course is dealing with structural design and stress analysis of thin-walled beams, plates and composite estructures.

Subjects

Aircraft loads | Aircraft loads | ≠a Estruc. | ≠a Estruc. | Bending and shear of open and closed | Bending and shear of open and closed | †beams | †beams | Shear | Shear | Ūa Aeroespacial | Ūa Aeroespacial | Aircraft | Aircraft | Bending of thin rectangular and circular plates | Bending of thin rectangular and circular plates | 2016 | 2016 | Composite and sandwich structures | Composite and sandwich structures | Structural description | Structural description | Thin-walled beams | Thin-walled beams | † beams | † beams | Structures in the aeronautical sector | Structures in the aeronautical sector | Wing | Wing | Bending | Bending | Laminate theory | Laminate theory | Structural component of the aircraft | Structural component of the aircraft | Failure criteria | Failure criteria | Empennage | Empennage | Fuselage | Fuselage | Thin plate theory | Thin plate theory | Torsion | Torsion

License

Copyright 2015, UC3M http://creativecommons.org/licenses/by-nc-sa/4.0/

Site sourced from

http://ocw.uc3m.es/ocwuniversia/rss_all

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

6.691 Seminar in Electric Power Systems (MIT) 6.691 Seminar in Electric Power Systems (MIT)

Description

This course comprises of a seminar on planning and operation of modern electric power systems. Content varies with current interests of instructor and class; emphasis on engineering aspects, but economic issues may be examined too. Core topics include: overview of power system structure and operation; representation of components, including transmission lines, transformers, generating plants, loads; power flow analysis, dynamics and control of multimachine systems, steady-state and transient stability, system protection; economic dispatch; mobile and isolated power systems; computation and simulation. This course comprises of a seminar on planning and operation of modern electric power systems. Content varies with current interests of instructor and class; emphasis on engineering aspects, but economic issues may be examined too. Core topics include: overview of power system structure and operation; representation of components, including transmission lines, transformers, generating plants, loads; power flow analysis, dynamics and control of multimachine systems, steady-state and transient stability, system protection; economic dispatch; mobile and isolated power systems; computation and simulation.

Subjects

Planning and operation of modern electric power systems | Planning and operation of modern electric power systems | engineering aspects | engineering aspects | power system structure and operation | power system structure and operation | representation of components | representation of components | transmission lines | transmission lines | transformers | transformers | generating plants | generating plants | loads | loads | power flow analysis | power flow analysis | dynamics and control of multimachine systems | dynamics and control of multimachine systems | steady-state and transient stability | steady-state and transient stability | system protection | system protection | economic dispatch | economic dispatch | mobil and isolated power systems | mobil and isolated power systems | computation and simulation | computation and simulation

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses-energy.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2713: Fire Design Example

Description

Example of fire design of the industrial building. This is a fully documented calculation example with direct reference to the actual code provisions. It is based on European Standard ENV 1999-2 (Eurocode 9)

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | static loads | fire loads | static design | thermal calculations | code checking | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

22.091 Nuclear Reactor Safety (MIT) 22.091 Nuclear Reactor Safety (MIT)

Description

Problems in nuclear engineering often involve applying knowledge from many disciplines simultaneously in achieving satisfactory solutions. The course will focus on understanding the complete nuclear reactor system including the balance of plant, support systems and resulting interdependencies affecting the overall safety of the plant and regulatory oversight. Both the Seabrook and Pilgrim nuclear plant simulators will be used as part of the educational experience to provide as realistic as possible understanding of nuclear power systems short of being at the reactor. Problems in nuclear engineering often involve applying knowledge from many disciplines simultaneously in achieving satisfactory solutions. The course will focus on understanding the complete nuclear reactor system including the balance of plant, support systems and resulting interdependencies affecting the overall safety of the plant and regulatory oversight. Both the Seabrook and Pilgrim nuclear plant simulators will be used as part of the educational experience to provide as realistic as possible understanding of nuclear power systems short of being at the reactor.

Subjects

nuclear | nuclear | reactor | reactor | safety | safety | dryout heat flux | dryout heat flux | preexisting hydrogen | preexisting hydrogen | blowdown gases | blowdown gases | downward propagation limit | downward propagation limit | debris dispersal | debris dispersal | direct containment heating | direct containment heating | gas blowthrough | gas blowthrough | seal table room | seal table room | subcompartment structures | subcompartment structures | compartmentalized geometries | compartmentalized geometries | overlying liquid layer | overlying liquid layer | preexisting atmosphere | preexisting atmosphere | blowdown time | blowdown time | melt generator | melt generator | detonation adiabatic | detonation adiabatic | thermohydraulic codes | thermohydraulic codes | hydrodynamic fragmentation | hydrodynamic fragmentation | vent clearing | vent clearing | combustion completeness | combustion completeness | containment pressurization | containment pressurization | melt retention | melt retention | containment loads | containment loads | melt ejection | melt ejection | containment geometry | containment geometry | hole ablation | hole ablation | Sandia National Laboratories | Sandia National Laboratories | Heat Transfer Conf | Heat Transfer Conf | Nuclear Regulatory Commission Report | Nuclear Regulatory Commission Report | Heat Mass Transfer | Heat Mass Transfer | The Combustion Institute | The Combustion Institute | Combustion Symposium International | Combustion Symposium International | New York | New York | Santa Barbara | Santa Barbara | Argonne National Laboratory | Argonne National Laboratory | Fluid Mech | Fluid Mech | Zion Probabilistic Safety Study | Zion Probabilistic Safety Study | Los Angeles | Los Angeles | Impact of Hydrogen | Impact of Hydrogen | Topical Meeting | Topical Meeting | Water Reactor Safety | Water Reactor Safety | Water Trans | Water Trans | Academic Press All | Academic Press All | American Society of Mechanical Engineers | American Society of Mechanical Engineers | Specialists Meeting | Specialists Meeting | University of California | University of California | Brookhaven National Laboratory | Brookhaven National Laboratory | Calvert Cliffs | Calvert Cliffs | Fourth Int | Fourth Int | International Conference | International Conference | New Trends. | New Trends.

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses-energy.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2301: Design of Members

Description

This lecture gives background to calculation methods for aluminium members in order to understand the specific behavior of statically loaded aluminium alloy structures. Basic structural mechanic, design philosophy and structural aluminium alloys and product forms is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | member | joint | static | safety | serviceability | geometrical imperfections | extruded profiles | welded profiles | residual stresses | mechanical properties | bauschinger effect | heat affected zones | stress-strain relationship | strength | reduced strength | partial coefficients | resistance factors | gross section | net section | local buckling | cross section classes | slender plates | effective cross section | class 4 cross sections | deflections of beams | breathing | bending moment | yielding | slenderness parameter | element classification | effective thickness | welded section | section with holes | lateral torsional buckling | axial force | tensile force | compressive force | euler load | squash load | flexural buckling | reduction factor | buckling length | splices | end connections | welded columns | columns with bolt holes | cut-outs | longitudinal welds | transverse welds | columns with unfilled bolt-holes | built-up members | intermediate stiffeners | edge stiffeners | single-sided rib | multi-stiffened plates | orthotropic plates | shear force | plate girder webs | shear buckling | shear resistance | webs with stiffeners | plate girders with intermediate stiffeners | corrugated webs | closely stiffened webs | concentrated loads | beam webs without stiffeners | beam webs with stiffeners | shear centre | closed sections | open sections | torsion without warping | torsion with warpin | bending and axial tension | bending and axial compression | strength of beam-column segments | rectangular section | strain hardening | plastic theory | i-section | h-section | thin walled cross sections | t-section | biaxial bending | linear stress distribution | shear lag | flange curling | lateral deflection | non-symmetrical flanges | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Create, share and reuse interactive HTML5 content in your browser

Description

Content, Rich content, Tools, Template, open Source, html5, h5p, Mobile friendly, Drupal, joomla!, Wordpress, Moodle, quiz, Interactive video, memory game, presentation, Dialog Cards, drag and drop, flashcards, fill in the blanks.

Subjects

Generic OER production tool. Examples and downloads. | Technologies | J000

License

Attribution-ShareAlike 4.0 International Attribution-ShareAlike 4.0 International http://creativecommons.org/licenses/by-sa/4.0/ http://creativecommons.org/licenses/by-sa/4.0/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2401: Fatigue Behaviour and Analysis

Description

This lecture explains why, when and where fatigue problems may arise and the special significance to aluminium as structural material; it helps to understand the effects of material and loading parameters on fatigue; to appreciate the statistical nature of fatigue and its importance in data analysis, evaluation and use; it shows how to estimate fatigue life under service conditions of time-dependent, variable amplitude loading; how to estimate stresses acting in notches and welds with conceptual approaches other than nominal stress; it provides qualitative and quantitative information on the classification of welded details and allow for more sophisticated design procedures. Background in materials engineering, design and fatigue is required.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | fatigue | fatigue cracks | susceptibility | cyclic loading | crack growth | crack propagation rate | endurance limit | predictive theories | damage accumulation theories | manson-coffin law | crack growth laws | ideal cumulative damage theory | fatigue data analysis | middle-cycle fatigue range | high-cycle fatigue range | fatigue diagrams | linear p-s-n curves | non-linear p-s-n curves | service behaviour | time dependent loads | load spectrum | cycle counting | rain-flow cycle counting method | service behaviour fatigue test | analytical life estimation | damage accumulation | palmgren-miner linear damage accumulation hypothesis | strain | fatigue life | notch theory | strain-life diagram | weld imperfections | static strength | fatigue strength | cracks | porosity | inclusions | oxides | lack of penetration | weld shape | lack of fusion | geometric misalignment | arc strike | spatter | post-weld mechanical imperfections | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Structures and materials (TTA104) : outline and introduction : presentation transcript

Description

This open educational resource was released through the Higher Education Academy Engineering Subject Centre Open Engineering Resources Pilot project. The project was funded by HEFCE and the JISC/HE Academy UKOER programme.

Subjects

ukoer | engscoer | cc-by | engcetl | loughborough university | higher education | learning | loughboroughunioer | equilibrium | homogeneity | structural materials | isotropy | structures | force | axially loaded structural members | loading | engineering | stress | strain | loads | materials | rate of loading | tta104 | Engineering | H000

License

Attribution 2.0 UK: England & Wales Attribution 2.0 UK: England & Wales http://creativecommons.org/licenses/by/2.0/uk/ http://creativecommons.org/licenses/by/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Film 1 (iPod Touch version)

Description

iPod Touch version

Subjects

iPod downloads

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://pencilsandpixels.blogs.lincoln.ac.uk/feed/

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Film 2 (iPod Touch version)

Description

iPod Touch version

Subjects

iPod downloads

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://pencilsandpixels.blogs.lincoln.ac.uk/feed/

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Film 3 (iPod Touch version)

Description

iPod Touch version

Subjects

iPod downloads

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://pencilsandpixels.blogs.lincoln.ac.uk/feed/

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Structures and materials : section 6 axially loaded structural members : presentation transcript

Description

This open educational resource was released through the Higher Education Academy Engineering Subject Centre Open Engineering Resources Pilot project. The project was funded by HEFCE and the JISC/HE Academy UKOER programme.

Subjects

ukoer | engscoer | cc-by | engcetl | loughborough university | higher education | learning | loughboroughunioer | engineering | tta104 | shear loading | axially loaded structural members | loads | loading | two-step steel rod | tapered cross section | rectangular cross-section | circular cross-section | shear | structural members | deformation | forces | axial member | axial loading | Engineering | H000

License

Attribution 2.0 UK: England & Wales Attribution 2.0 UK: England & Wales http://creativecommons.org/licenses/by/2.0/uk/ http://creativecommons.org/licenses/by/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

6.691 Seminar in Electric Power Systems (MIT)

Description

This course comprises of a seminar on planning and operation of modern electric power systems. Content varies with current interests of instructor and class; emphasis on engineering aspects, but economic issues may be examined too. Core topics include: overview of power system structure and operation; representation of components, including transmission lines, transformers, generating plants, loads; power flow analysis, dynamics and control of multimachine systems, steady-state and transient stability, system protection; economic dispatch; mobile and isolated power systems; computation and simulation.

Subjects

Planning and operation of modern electric power systems | engineering aspects | power system structure and operation | representation of components | transmission lines | transformers | generating plants | loads | power flow analysis | dynamics and control of multimachine systems | steady-state and transient stability | system protection | economic dispatch | mobil and isolated power systems | computation and simulation

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Film 4 (iPod Touch version)

Description

iPod Touch version

Subjects

iPod downloads

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://pencilsandpixels.blogs.lincoln.ac.uk/feed/

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Structures and materials : section 7 stress concentration : presentation transcript

Description

This open educational resource was released through the Higher Education Academy Engineering Subject Centre Open Engineering Resources Pilot project. The project was funded by HEFCE and the JISC/HE Academy UKOER programme.

Subjects

ukoer | engscoer | cc-by | engcetl | loughborough university | higher education | learning | loughboroughunioer | engineering | tta104 | fatigue | stress concentration factor formulae | failure | loads | stress concentration | fracture | loading | structural failure | stress | forces | force | fracture toughness | yield limited design | far-field stress | Engineering | H000

License

Attribution 2.0 UK: England & Wales Attribution 2.0 UK: England & Wales http://creativecommons.org/licenses/by/2.0/uk/ http://creativecommons.org/licenses/by/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Film 5 (iPod Touch version)

Description

iPod Touch version

Subjects

iPod downloads

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://pencilsandpixels.blogs.lincoln.ac.uk/feed/

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Film 6 (iPod Touch version)

Description

iPod Touch version

Subjects

iPod downloads

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://pencilsandpixels.blogs.lincoln.ac.uk/feed/

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata