Searching for solidification : 31 results found | RSS Feed for this search

1

3.044 Materials Processing (MIT) 3.044 Materials Processing (MIT)

Description

This course is focused on physical understanding of materials processing, and the scaling laws that govern process speed, volume, and material quality. In particular, this course will cover the transport of heat and matter as these topics apply to materials processing. This course is focused on physical understanding of materials processing, and the scaling laws that govern process speed, volume, and material quality. In particular, this course will cover the transport of heat and matter as these topics apply to materials processing.

Subjects

materials processing | materials processing | heat conduction | heat conduction | heat transfer | heat transfer | Biot number | Biot number | glass fibers | glass fibers | thermal spray | thermal spray | 2D analysis | 2D analysis | friction welding | friction welding | radiation | radiation | black bodies | black bodies | emessivity | emessivity | solidification | solidification | sand casting | sand casting | lost foam | lost foam | molds | molds | binary solidification | binary solidification | microstructures | microstructures | fluid flow | fluid flow | glass production | glass production | Pilkington glass | Pilkington glass | drag force | drag force | Newtonian | Newtonian | non-Newtonian | non-Newtonian | blow molding | blow molding | compressive forming | compressive forming | powder | powder | sintering | sintering | slurry | slurry | and colloid processing | and colloid processing | steel making | steel making | electronics manufacturing | electronics manufacturing

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses-3.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4202: Weldability

Description

This lecture describes the important factors governing weldability of aluminium, such as influence of alloying elements, combinations of base material and filler materials and edge preparation for welding. Basic knowledge in metallurgy of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | weld cracking sensitivity | weldability | solidification | houldcroft test | 6013 t6 alloy | almgsicu | al-si alloys | al-mg alloys | wrought alloys | melting | solidification range | solidification intervals | pre-heating | filler metals | joint vicinity | surface preparation | tig welding | mig welding | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4202: Weldability

Description

This lecture describes the important factors governing weldability of aluminium, such as influence of alloying elements, combinations of base material and filler materials and edge preparation for welding. Basic knowledge in metallurgy of aluminium is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | arc welding | weld cracking sensitivity | weldability | solidification | Houldcroft test | 6013 T6 alloy | AlMgSiCu | Al-Si alloys | Al-Mg alloys | wrought alloys | melting | solidification range | solidification intervals | preheating | filler metals | joint vicinity | surface preparation | TIG welding | MIG welding | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.37 Welding and Joining Processes (MIT) 3.37 Welding and Joining Processes (MIT)

Description

Discusses a wide variety of processes and materials from the viewpoint of their fundamental physical and chemical properties. Specific topics: cold welding, adhesive bonding, diffusion bonding, soldering, brazing, flames, arcs, high-energy density heat sources, solidification, cracking resistance, shielding methods, and electric contacts. Emphasis on underlying science of a given process rather than a detailed description of the technique or equipment. This course meets with the first half of 3.371J in the Fall Term. Discusses a wide variety of processes and materials from the viewpoint of their fundamental physical and chemical properties. Specific topics: cold welding, adhesive bonding, diffusion bonding, soldering, brazing, flames, arcs, high-energy density heat sources, solidification, cracking resistance, shielding methods, and electric contacts. Emphasis on underlying science of a given process rather than a detailed description of the technique or equipment. This course meets with the first half of 3.371J in the Fall Term.

Subjects

cold welding | cold welding | adhesive bonding | adhesive bonding | diffusion bonding | diffusion bonding | soldering | soldering | brazing | brazing | flames | flames | arcs | arcs | high-energy density heat sources | high-energy density heat sources | solidification | solidification | cracking resistance | cracking resistance | shielding methods | shielding methods | electric contacts | electric contacts

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses-3.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 3204: The Freezing of Castings

Description

This lecture provides an introduction to solidification theory; it aims at achieving an essential background understanding of solidification and cast structures. Basic knowledge of the solidification of metals is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | machining | forming | casting | equilibrium solidification | non-equilibrium analysis | solute rejection model | solid front growth | dendrite arm spacing | das | grain refinement | transition in growth morphology | alloying elements | sodium effect | strontium effect | antimony effect | alumonium-silicon hypereutectic | solidification | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.044 Materials Processing (MIT)

Description

This course is focused on physical understanding of materials processing, and the scaling laws that govern process speed, volume, and material quality. In particular, this course will cover the transport of heat and matter as these topics apply to materials processing.

Subjects

materials processing | heat conduction | heat transfer | Biot number | glass fibers | thermal spray | 2D analysis | friction welding | radiation | black bodies | emessivity | solidification | sand casting | lost foam | molds | binary solidification | microstructures | fluid flow | glass production | Pilkington glass | drag force | Newtonian | non-Newtonian | blow molding | compressive forming | powder | sintering | slurry | and colloid processing | steel making | electronics manufacturing

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 3204: The Freezing of Castings

Description

This lecture provides an introduction to solidification theory; it aims at achieving an essential background understanding of solidification and cast structures. Basic knowledge of the solidification of metals is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | machining | forming | casting | equilibrium solidification | non-equilibrium analysis | solute rejection model | solid front growth | dendrite arm spacing | DAS | grain refinement | transition in growth morphology | alloying elements | sodium effect | strontium effect | antimony effect | alumonium-silicon hypereutectic | solidification | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2203: Structural materials fabrication

Description

This lecture gives a brief introduction into the basic fabrication methods for structural aluminium alloy materials with respect to machining, forming, joining and surface treatments as a necessary background for the design process; it describes the subject of welding structural aluminium alloys in order to understand the materials requirements which the designer has to take into account when designing load carrying welded aluminium structures. General materials engineering background is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | structural design | preparation | extrusion | cutting | plasma gas cutting | shearing | sawing | machining | cold forming | bending | cold forging | bolting | riveting | adhesive bonding | explosion welded connections | sandwich element construction | surface treatment | joining | chemical properties | physical properties | welding | inert gas welding | mig welding | pulsed arc mig welding | plasma mig welding | tig welding | filler materials | weldability | joint design | backing methods | cleaning | shielding gas | pre-heating | weld cracks | solidification cracks | solution cracks | weld imperfections | economy | distortion | inspection | non-destructive testing | destructive testing | quality control aspects | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Atomic Structure and Microstructure of Materials: Solidification of Alloys

Description

This set of animations covers different aspects of solidification, it includes interactive phase diagrams. From TLP: Solidification of Alloys

Subjects

solidification | solute | partitioning | steady state | undercooling | dendrites | schiel | phase diagram | DoITPoMS | University of Cambridge | animation | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_animations.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fabrication and Processing of Materials: Casting

Description

This set of animations demonstrates examples of die-casting, sand-casting and continuous casting processes. It includes a user controlled Newtonian cooling simulation. From TLP: Casting

Subjects

casting | Biot number | solute | solute partitioning | dendrite | solidification | newtonian cooling | segregation | Chill zone | Columnar zone | Equiaxed zone | sand-casting | die-casting | DoITPoMS | University of Cambridge | animation | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_animations.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 3203: The Filling of Castings

Description

This lecture describes the function and design of all parts of the running and gating systems used in the production of castings. The students will be able to tackle the design of a simple running system in a systematic manner. Basic knowledge of foundry processes and basic mathematics is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | machining | forming | casting | filling system | oxide formation | casting defects | critical velocity | assessment design | pouring basin | tapered sprue | sprue well | runner bar | gates | nomogram for running system | solidification time assessment | sprue height | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 3205: The Fluidity of Molten Metals

Description

This lecture introduces the concept of fluidity of molten metal and its influence on the production of castings. The students will understand the relevance of fluidity, the means by which this is measured and the effect of alloy type. Basic understanding of foundry processes, phase diagrams, basic physics and mathematics background is assumed

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | machining | forming | casting | fluidity | solidification rates | short freezing range alloys | long freezing range alloys | impurities | map of fluidity | surface tension | section thickness | concept of continuous fluidity | feeding | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Solidification and grain structure of pure metals - part two

Description

An introduction to the solidification and grain structure of pure metals - part two, comprising a learning context.

Subjects

grain structure | metals | solidification | interatomic distance | MATHEMATICS | Physical Sciences | Learning | Students | UK EL05 = SCQF 5 | Intermediate level | Intermediate | NICAT 2 | CQFW 2 | Intermediate | GSCE A-C | NVQ 2 | | Physical sciences | F000 | SCIENCES and MATHEMATICS | R

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 1205: Introduction to Mechanical Properties, Casting, Forming, Joining and Corrosion

Description

This lecture provides background, basic information on mechanical properties and testing, solidification and casting, joining and corrosion of aluminium and its alloys. Basic knowledge of physics and chemistry and some familiarity with lectures 1201 and 1203 is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | mechanical properties | tensile testing | hardness testing | solidification | casting | joining | brazing | corrosion | corrosion protection | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 1255: Metallurgical Background to Alloy Selection and Specifications for Wrought, Cast and Special Applications

Description

This lecture outlines the metallurgical principles of alloy selection and specifications. Basic knowledge of physics and chemistry and some familiarity with TALAT lectures 1201 through 1205 is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | alloy selection | wrought alloys | cast alloys | aerospace alloys | hot isostatic processing | particulate processing | rapid solidification processing | particulate metal matrix composites | Al-Li based alloys | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 1401: Aluminium Powder Metallurgy

Description

This lecture outlines the differences between conventionally produced and powder metallurgy aluminium with respect to potential uses; it aims at learning about the various processes to produce and to consolidate alloy powders; it illustrates the extension of the useful property range beyond that of limits of conventionally processed aluminium alloys; it explains the advantages and disadvantages of aluminium produced by powder metallurgy; it shows the potential of aluminium produced by the route of powder metallurgy. Knowledge in metallurgy, materials science, materials engineering is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | advanced materials | powder fabrication | rapid solidification | caracterisation | powder | precompaction | cold compaction | sintering | hot consolidation | post consolidation | spray forming | P/M 7 XXX alloys | high strength alloys | elevated temperatures | mechanical alloying | high modulus | safety | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2203: Structural materials fabrication

Description

This lecture gives a brief introduction into the basic fabrication methods for structural aluminium alloy materials with respect to machining, forming, joining and surface treatments as a necessary background for the design process; it describes the subject of welding structural aluminium alloys in order to understand the materials requirements which the designer has to take into account when designing load carrying welded aluminium structures. General materials engineering background is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | product | structural design | preparation | extrusion | cutting | plasma gas cutting | shearing | sawing | machining | cold forming | bending | cold forging | bolting | riveting | adhesive bonding | explosion welded connections | sandwich element construction | surface treatment | joining | chemical properties | physical properties | welding | inert gas welding | MIG welding | pulsed arc MIG welding | plasma MIG welding | TIG welding | filler materials | weldability | joint design | backing methods | cleaning | shielding gas | pre-heating | weld cracks | solidification cracks | solution cracks | weld imperfections | economy | distortion | inspection | non-destructive testing | destructive testing | quality control aspects | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Solidification and grain structure of pure metals - part one

Description

An introduction to the solidification and grain structure of pure metals - part one, comprising a learning context and associated assessment.

Subjects

grain structure | metals | solidification | MATHEMATICS | Physical Sciences | Assessment | Students | UK EL05 = SCQF 5 | Intermediate level | Intermediate | NICAT 2 | CQFW 2 | Intermediate | GSCE A-C | NVQ 2 | | Physical sciences | F000 | SCIENCES and MATHEMATICS | R

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

3.37 Welding and Joining Processes (MIT)

Description

Discusses a wide variety of processes and materials from the viewpoint of their fundamental physical and chemical properties. Specific topics: cold welding, adhesive bonding, diffusion bonding, soldering, brazing, flames, arcs, high-energy density heat sources, solidification, cracking resistance, shielding methods, and electric contacts. Emphasis on underlying science of a given process rather than a detailed description of the technique or equipment. This course meets with the first half of 3.371J in the Fall Term.

Subjects

cold welding | adhesive bonding | diffusion bonding | soldering | brazing | flames | arcs | high-energy density heat sources | solidification | cracking resistance | shielding methods | electric contacts

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fracture surface formed by hot tearing (solidification cracking)

Description

Solidification cracking (hot tearing) is a significant problem when casting various alloys, particularly highly alloyed compositions with a relatively large freezing range. Impurities which lead to low melting point segregates can also cause this problem. [...]

Subjects

alloy | dendrite | hot tearing | metal | solidification cracking | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Rapid solidification in an atomised droplet

Description

Because of the fine scale of the droplet, heat extraction is very rapid, and large undercoolings are achieved before crystal nucleation can begin. Thus, in this droplet, the solidification front has advanced very rapidly through the droplet from the nucleation point (on the surface at the left of the image). Its velocity is initially so great that no interfacial breakdown is possible. As the front advances, however, latent heat is evolved and this 'recalescence' reduces the rate of solidification to a point where interfacial breakdown is possible and a cellular structure is observed in the last region to solidify (at the right hand side of the image).

Subjects

alloy | atomising | droplet | hypercooled | latent heat | metal | rapid solidification | recalescence | soldidification | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 3203: The Filling of Castings

Description

This lecture describes the function and design of all parts of the running and gating systems used in the production of castings. The students will be able to tackle the design of a simple running system in a systematic manner. Basic knowledge of foundry processes and basic mathematics is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | machining | forming | casting | filling system | oxide formation | casting defects | critical velocity | design assessment | pouring basin | tapered sprue | sprue well | runner bar | gates | nomogram for running system | solidification time assessment | sprue height | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 3205: The Fluidity of Molten Metals

Description

This lecture introduces the concept of fluidity of molten metal and its influence on the production of castings. The students will understand the relevance of fluidity, the means by which this is measured and the effect of alloy type. Basic understanding of foundry processes, phase diagrams, basic physics and mathematics background is assumed

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | machining | forming | casting | fluidity | solidification rates | short freezing range alloys | long freezing range alloys | impurities | map of fluidity | surface tension | section thickness | concept of continuous fluidity | feeding | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Atomic Structure and Microstructure of Materials: Solidification of Alloys

Description

This set of animations covers different aspects of solidification, it includes interactive phase diagrams. From TLP: Solidification of Alloys

Subjects

solidification | solute | partitioning | steady state | undercooling | dendrites | schiel | phase diagram | doitpoms | university of cambridge | animation | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Solidification and grain structure of pure metals - part three

Description

An introduction to the solidification and grain structure of pure metals - part three, comprising a learning context and associated assessment.

Subjects

grain structure | metals | solidification | nucleation | MATHEMATICS | Physical Sciences | Assessment | Students | UK EL05 = SCQF 5 | Intermediate level | Intermediate | NICAT 2 | CQFW 2 | Intermediate | GSCE A-C | NVQ 2 | | Physical sciences | F000 | SCIENCES and MATHEMATICS | R

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata