Searching for tilting : 3 results found | RSS Feed for this search

TALAT Lecture 2302: Design of Joints

Description

This lecture provides a view of types of joints in aluminium structures and how to design and calculate frequently used joints. Basic structural mechanics and knowledge of design philosophy, structural aluminium alloys and product forms is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | member | joint | static | welding | screws | bolts | riveting | solid state welding | special mechanical joints | joints in thin-walled structures | thread forming screws | blind rivets | cartridge fired pin connections | spot welding | adhesive bonded connections | fasteners | mechanical properties | connections | friction type bolt joints | fastenings | failure modes | deformation | spot welds | design strength | hole bearing | tilting | sheet tearing | edge failure | tension | shear | tensile failure | pull-through failure | pull-over failure | pull-out failure | lap joints | pin connections | heat affected zone | butt welds | fillet welds | ultimate limit state | welded connections | strength | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Changing the direction of a stage lantern beam

Description

Flash asset changing the direction of the beam taken from a stage lantern

Subjects

lantern | beam | yoke | panning | tilting | lighting | stage design | theatrical set design | PERFORMING ARTS | L

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2302: Design of Joints

Description

This lecture provides a view of types of joints in aluminium structures and how to design and calculate frequently used joints. Basic structural mechanics and knowledge of design philosophy, structural aluminium alloys and product forms is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | product | member | joint | static | welding | screws | bolts | riveting | solid state welding | special mechanical joints | joints in thin-walled structures | thread forming screws | blind rivets | cartridge fired pin connections | spot welding | adhesive bonded connections | fasteners | mechanical properties | connections | friction type bolt joints | fastenings | failure modes | deformation | spot welds | design strength | hole bearing | tilting | sheet tearing | edge failure | tension | shear | tensile failure | pull-through failure | pull-over failure | pull-out failure | lap joints | pin connections | heat affected zone | butt welds | fillet welds | ultimate limit state | welded connections | strength | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata