Searching for toughness : 38 results found | RSS Feed for this search

1 2

2.002 Mechanics and Materials II (MIT) 2.002 Mechanics and Materials II (MIT)

Description

This course provides Mechanical Engineering students with an awareness of various responses exhibited by solid engineering materials when subjected to mechanical and thermal loadings; an introduction to the physical mechanisms associated with design-limiting behavior of engineering materials, especially stiffness, strength, toughness, and durability; an understanding of basic mechanical properties of engineering materials, testing procedures used to quantify these properties, and ways in which these properties characterize material response; quantitative skills to deal with materials-limiting problems in engineering design; and a basis for materials selection in mechanical design. This course provides Mechanical Engineering students with an awareness of various responses exhibited by solid engineering materials when subjected to mechanical and thermal loadings; an introduction to the physical mechanisms associated with design-limiting behavior of engineering materials, especially stiffness, strength, toughness, and durability; an understanding of basic mechanical properties of engineering materials, testing procedures used to quantify these properties, and ways in which these properties characterize material response; quantitative skills to deal with materials-limiting problems in engineering design; and a basis for materials selection in mechanical design.

Subjects

beam bending | beam bending | buckling | buckling | vibration | vibration | polymers | polymers | viscoelasticity | viscoelasticity | strength | strength | ductility | ductility | stress | stress | stress concentration | stress concentration | sheet bending | sheet bending | heat treatment | heat treatment | fracture | fracture | plasticity | plasticity | creep | creep | fatigue | fatigue | solid materials | solid materials | mechanical loading | mechanical loading | thermal loading | thermal loading | design-limiting behavior | design-limiting behavior | stiffness | stiffness | toughness | toughness | durability | durability | engineering materials | engineering materials | materials-limiting problem | materials-limiting problem | materials selection | materials selection

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2403: Applied Fracture Mechanics

Description

This lecture demonstrates how to teach the principles and concepts of fracture mechanics as well as provide recommendations for practical applications; it provides necessary information for fatigue life estimations on the basis of fracture mechanics as a complementary method to the S-N concept. Background in engineering, materials and fatigue is required.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | fatigue | fracture | notch toughness | brittle fracture | performance level | toughness | crack size | stress level | stress intensity factors | deformation | crack tip | superposition | linear-elastic fracture mechanics | kic | astm-e399 test method | elastic-plastic fracture mechanics | crack opening displacement | test method bs 5762 | r-curves | astm-e561 | astm-e813 | astm-e1152 | j-r curves | jic | free surface correction fs | crack shape correction fe | finite plate dimension correction fw | correction factors for stress gradient fg | crack geometry | evaluation | welded coverplate | web stiffener | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2403: Applied Fracture Mechanics

Description

This lecture demonstrates how to teach the principles and concepts of fracture mechanics as well as provide recommendations for practical applications; it provides necessary information for fatigue life estimations on the basis of fracture mechanics as a complementary method to the S-N concept. Background in engineering, materials and fatigue is required.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | fatigue | fracture | notch toughness | brittle fracture | performance level | toughness | crack size | stress level | stress intensity factors | deformation | crack tip | superposition | linear-elastic fracture mechanics | KIc | ASTM-E399 test method | elastic-plastic fracture mechanics | crack opening displacement | test method BS 5762 | R-curves | ASTM-E561 | ASTM-E813 | ASTM-E1152 | J-R curves | JIc | free surface correction Fs | crack shape correction Fe | finite plate dimension correction Fw | correction factors for stress gradient Fg | crack geometry | evaluation | welded coverplate | web stiffener | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Sports Psychology. From the track to the classroom: applying sport psychology to the academic environment

Description

The use of sports psychology has become highly significant in may sports.This case study examines the use of effective sports psychology interventions to maximise performance and potential. including visualisation, relaxation techniques, coping strategies, and considers whether they could also be used to help students with their academic performance.

Subjects

UKOER OER Visualisation Relaxation techniques Coping strategies Mental toughness in sport

License

Creative Commons Licence
This work is licensed under a Creative Commons Attribution 2.0 UK: England & Wales License, except where otherwise noted within the resource. This work is licensed under a Creative Commons Attribution 2.0 UK: England & Wales License, except where otherwise noted within the resource.

Site sourced from

https://radar.brookes.ac.uk/radar/oai?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Zirconia Toughened Alumina (ZTA)

Description

The ZrO2 addition to Al2O3 increases its toughness via the tetragonal to monoclinic ZrO2 transformation, so called transformation toughening and microcracking. The bright zirconia can be inter- or intra-granular. [...]

Subjects

alumina | ceramic | composite material | toughness | zirconia | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Tetragonal Zirconia Polycrystals (TZP)

Description

The comparatively low sintering temperature allows very fine grained (sub-micron), dense and so high strength as well as tough ceramics to be produced. The microstructure shows equiaxed, fine grains with little evidence of weakening grain boundary phases. Such microstructures have some of the highest values of toughness achieved in ceramics.

Subjects

ceramic | engineering ceramic | tough ceramic | toughness | zirconia | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Partially Stabilised Zirconia (PSZ)

Description

Ms) tetragonal precipitates in the cubic matrix. On interaction with a propagating crack, these transform to monoclinic symmetry expanding to close the crack so increasing toughness, so-called transformation toughening.

Subjects

ceramic | engineering ceramic | tough ceramic | toughness | zirconia | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Carbon-carbon composite

Description

Carbon-carbon composites are manufactured from continuous carbon fibres which are woven in a two or three dimensional pattern. The fibres are then impregnated with a polymeric resin. After the component has been shaped and cured the matrix is pyrolysed by heating in an inert atmosphere. This converts the matrix to carbon chain molecules which are densified by further heat treatments. The resulting composite consists of the original carbon fibres in a carbon matrix. Carbon-carbon composites have low density, high strength and high modulus. These properties are retained to temperatures above 2000C. Creep resistance and toughness are also high, and the high thermal conductivity and low thermal expansion coefficient provide thermal shock resistance. The woven structure of this composite can

Subjects

carbon-carbon composite | composite material | polymeric resin | pyrolysis | toughness | woven continuous carbon fibres | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Carbon-carbon composite

Description

Carbon-carbon composites are manufactured from continuous carbon fibres which are woven in a two or three dimensional pattern. The fibres are then impregnated with a polymeric resin. After the component has been shaped and cured the matrix is pyrolysed by heating in an inert atmosphere. This converts the matrix to carbon chain molecules which are densified by further heat treatments. The resulting composite consists of the original carbon fibres in a carbon matrix. Carbon-carbon composites have low density, high strength and high modulus. These properties are retained to temperatures above 2000C. Creep resistance and toughness are also high, and the high thermal conductivity and low thermal expansion coefficient provide thermal shock resistance. The woven structure of this composite can

Subjects

carbon-carbon composite | composite material | polymeric resin | pyrolysis | toughness | woven continuous carbon fibres | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Carbon-carbon composite

Description

Carbon-carbon composites are manufactured from continuous carbon fibres which are woven in a two or three dimensional pattern. The fibres are then impregnated with a polymeric resin. After the component has been shaped and cured the matrix is pyrolysed by heating in an inert atmosphere. This converts the matrix to carbon chain molecules which are densified by further heat treatments. The resulting composite consists of the original carbon fibres in a carbon matrix. Carbon-carbon composites have low density, high strength and high modulus. These properties are retained to temperatures above 2000C. Creep resistance and toughness are also high, and the high thermal conductivity and low thermal expansion coefficient provide thermal shock resistance. The woven structure of this composite can

Subjects

carbon-carbon composite | composite material | polymeric resin | pyrolysis | toughness | woven continuous carbon fibres | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Carbon-carbon composite

Description

Carbon-carbon composites are manufactured from continuous carbon fibres which are woven in a two or three dimensional pattern. The fibres are then impregnated with a polymeric resin. After the component has been shaped and cured the matrix is pyrolysed by heating in an inert atmosphere. This converts the matrix to carbon chain molecules which are densified by further heat treatments. The resulting composite consists of the original carbon fibres in a carbon matrix. Carbon-carbon composites have low density, high strength and high modulus. These properties are retained to temperatures above 2000C. Creep resistance and toughness are also high, and the high thermal conductivity and low thermal expansion coefficient provide thermal shock resistance. The woven structure of this composite can

Subjects

carbon-carbon composite | composite material | polymeric resin | pyrolysis | toughness | woven continuous carbon fibres | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Carbon-carbon composite

Description

Carbon-carbon composites are manufactured from continuous carbon fibres which are woven in a two or three dimensional pattern. The fibres are then impregnated with a polymeric resin. After the component has been shaped and cured the matrix is pyrolysed by heating in an inert atmosphere. This converts the matrix to carbon chain molecules which are densified by further heat treatments. The resulting composite consists of the original carbon fibres in a carbon matrix. Carbon-carbon composites have low density, high strength and high modulus. These properties are retained to temperatures above 2000C. Creep resistance and toughness are also high, and the high thermal conductivity and low thermal expansion coefficient provide thermal shock resistance. The woven structure of this composite can

Subjects

carbon-carbon composite | composite material | polymeric resin | pyrolysis | toughness | woven continuous carbon fibres | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Biomaterials and Biomedical Materials: Optimisation of Materials Properties in Living Systems

Description

This set of animations demonstrates interactive use of property maps in comparing engineering materials with natural materials. From TLP: Optimisation of Materials Properties in Living Systems

Subjects

materials selection | biomaterials | optimisation | ??s modulus | strength | density | toughness | property map | DoITPoMS | University of Cambridge | animation | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_animations.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Structures and materials : section 7 stress concentration : presentation transcript

Description

This open educational resource was released through the Higher Education Academy Engineering Subject Centre Open Engineering Resources Pilot project. The project was funded by HEFCE and the JISC/HE Academy UKOER programme.

Subjects

ukoer | engscoer | cc-by | engcetl | loughborough university | higher education | learning | loughboroughunioer | engineering | tta104 | fatigue | stress concentration factor formulae | failure | loads | stress concentration | fracture | loading | structural failure | stress | forces | force | fracture toughness | yield limited design | far-field stress | Engineering | H000

License

Attribution 2.0 UK: England & Wales Attribution 2.0 UK: England & Wales http://creativecommons.org/licenses/by/2.0/uk/ http://creativecommons.org/licenses/by/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

2.002 Mechanics and Materials II (MIT)

Description

This course provides Mechanical Engineering students with an awareness of various responses exhibited by solid engineering materials when subjected to mechanical and thermal loadings; an introduction to the physical mechanisms associated with design-limiting behavior of engineering materials, especially stiffness, strength, toughness, and durability; an understanding of basic mechanical properties of engineering materials, testing procedures used to quantify these properties, and ways in which these properties characterize material response; quantitative skills to deal with materials-limiting problems in engineering design; and a basis for materials selection in mechanical design.

Subjects

beam bending | buckling | vibration | polymers | viscoelasticity | strength | ductility | stress | stress concentration | sheet bending | heat treatment | fracture | plasticity | creep | fatigue | solid materials | mechanical loading | thermal loading | design-limiting behavior | stiffness | toughness | durability | engineering materials | materials-limiting problem | materials selection

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Zirconia Toughened Alumina (ZTA)

Description

The ZrO2 addition to Al2O3 increases its toughness via the tetragonal to monoclinic ZrO2 transformation, so called transformation toughening and microcracking. The bright zirconia can be inter- or intra-granular. [...]

Subjects

alumina | ceramic | composite material | toughness | zirconia | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Tetragonal Zirconia Polycrystals (TZP)

Description

The comparatively low sintering temperature allows very fine grained (sub-micron), dense and so high strength as well as tough ceramics to be produced. The microstructure shows equiaxed, fine grains with little evidence of weakening grain boundary phases. Such microstructures have some of the highest values of toughness achieved in ceramics.

Subjects

ceramic | engineering ceramic | tough ceramic | toughness | zirconia | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Partially Stabilised Zirconia (PSZ)

Description

The image shows cross sections through the oblate spheroid (like Smarties or M&Ms) tetragonal precipitates in the cubic matrix. On interaction with a propagating crack, these transform to monoclinic symmetry expanding to close the crack so increasing toughness, so-called transformation toughening.

Subjects

ceramic | engineering ceramic | tough ceramic | toughness | zirconia | DoITPoMS | University of Cambridge | micrograph | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/doitpoms_images.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fe, C 0.55 (wt%) steel, quenched and tempered

Description

Medium carbon steel quenched to produce martensite and subsequently tempered in order to reduce its hardness and increase toughness.

Subjects

alloy | carbon | iron | martensite | metal | quenching | steel | tempered | toughness | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fe, C 0.55 (wt%) steel, quenched and tempered

Description

Medium carbon steel quenched to produce martensite and subsequently tempered in order to reduce its hardness and increase toughness.

Subjects

alloy | carbon | iron | martensite | metal | quenching | steel | tempered | toughness | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fe, C 0.3 (wt%) steel, quenched and tempered

Description

Medium carbon steel quenched to produce martensite and subsequently tempered in order to reduce its hardness and increase toughness.

Subjects

alloy | carbon | iron | martensite | metal | quenching | steel | tempered | toughness | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fe, C 0.3 (wt%) steel, quenched and tempered

Description

Medium carbon steel quenched to produce martensite and subsequently tempered in order to reduce its hardness and increase toughness.

Subjects

alloy | carbon | iron | martensite | metal | quenching | steel | tempered | toughness | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Fe, C 0.3 (wt%) steel, quenched and tempered

Description

Medium carbon steel quenched to produce martensite and subsequently tempered in order to reduce its hardness and increase toughness.

Subjects

alloy | carbon | iron | martensite | metal | quenching | steel | tempered | toughness | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Glass-fibre reinforced polymer

Description

15 vol % of short glass fibres are intimately mixed with the polypropylene matrix and injection moulded together. The fibre orientation reflects the flow of material into the mould. In this case, the fibres are well aligned in the outer layers of the moulding but more randomly aligned near the core.

Subjects

alignment | composite material | fibre | glass | glass fibre reinforced composite | glass fibres | injection moulding | polymer | polymer composite | polypropylene (pp) | thermoplastic | toughness | doitpoms | university of cambridge | micrograph | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Sports Psychology. From the track to the classroom: applying sport psychology to the academic environment

Description

The use of sports psychology has become highly significant in may sports.This case study examines the use of effective sports psychology interventions to maximise performance and potential. including visualisation, relaxation techniques, coping strategies, and considers whether they could also be used to help students with their academic performance.

Subjects

UKOER OER Visualisation Relaxation techniques Coping strategies Mental toughness in sport

License

This work is licensed under a Creative Commons Attribution 2.0 UK: England and Wales License,except where otherwise noted within the resource. This work is licensed under a Creative Commons Attribution 2.0 UK: England and Wales License,except where otherwise noted within the resource.

Site sourced from

https://radar.brookes.ac.uk/radar/oai?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata