Searching for quality control : 15 results found | RSS Feed for this search

1

1.77 Water Quality Control (MIT) 1.77 Water Quality Control (MIT)

Description

The course material emphasizes mathematical models for predicting distribution and fate of effluents discharged into lakes, reservoirs, rivers, estuaries, and oceans. It also focuses on formulation and structure of models as well as analytical and simple numerical solution techniques. Also discussed are the role of element cycles, such as oxygen, nitrogen, and phosphorus, as water quality indicators; offshore outfalls and diffusion; salinity intrusion in estuaries; and thermal stratification, eutrophication, and sedimentation processes in lakes and reservoirs. This course is a core requirement for the Environmental MEng program. The course material emphasizes mathematical models for predicting distribution and fate of effluents discharged into lakes, reservoirs, rivers, estuaries, and oceans. It also focuses on formulation and structure of models as well as analytical and simple numerical solution techniques. Also discussed are the role of element cycles, such as oxygen, nitrogen, and phosphorus, as water quality indicators; offshore outfalls and diffusion; salinity intrusion in estuaries; and thermal stratification, eutrophication, and sedimentation processes in lakes and reservoirs. This course is a core requirement for the Environmental MEng program.

Subjects

water quality control | water quality control | mathematical models | mathematical models | effluents | effluents | lakes | lakes | reservoirs | reservoirs | rivers | rivers | estuaries | estuaries | oceans | oceans | element cycles | element cycles | water quality indicators | water quality indicators | offshore outfalls | offshore outfalls | diffusion | diffusion | salinity intrusion | salinity intrusion | thermal stratification | thermal stratification | eutrophication | eutrophication | sedimentation processes | sedimentation processes

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

15.760B Introduction to Operations Management (MIT) 15.760B Introduction to Operations Management (MIT)

Description

This half-term course introduces students to problems and analysis related to the design, planning, control, and improvement of manufacturing and service operations. Class sessions involve explaining concepts, working examples, and discussing cases. A wide range of topics are covered, including: process analysis, quality management, supply chain design, procurement, and product development. Toward the end of the course, students work in teams to manage a virtual factory in a web-based simulation exercise. This half-term course introduces students to problems and analysis related to the design, planning, control, and improvement of manufacturing and service operations. Class sessions involve explaining concepts, working examples, and discussing cases. A wide range of topics are covered, including: process analysis, quality management, supply chain design, procurement, and product development. Toward the end of the course, students work in teams to manage a virtual factory in a web-based simulation exercise.

Subjects

operations management | operations management | service operations | service operations | manufacturing design | manufacturing design | manufacturing planning | manufacturing planning | production control | production control | quality management | quality management | process design | process design | reengineering | reengineering | product development | product development | project management | project management | supply chain design | supply chain design | improving manufacturing processes | improving manufacturing processes | capacity | capacity | inventory | inventory | quality control | quality control | product design | product design | factory management | factory management

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see http://ocw.mit.edu/terms/index.htm

Site sourced from

http://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2203: Structural materials fabrication

Description

This lecture gives a brief introduction into the basic fabrication methods for structural aluminium alloy materials with respect to machining, forming, joining and surface treatments as a necessary background for the design process; it describes the subject of welding structural aluminium alloys in order to understand the materials requirements which the designer has to take into account when designing load carrying welded aluminium structures. General materials engineering background is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | design | product | structural design | preparation | extrusion | cutting | plasma gas cutting | shearing | sawing | machining | cold forming | bending | cold forging | bolting | riveting | adhesive bonding | explosion welded connections | sandwich element construction | surface treatment | joining | chemical properties | physical properties | welding | inert gas welding | MIG welding | pulsed arc MIG welding | plasma MIG welding | TIG welding | filler materials | weldability | joint design | backing methods | cleaning | shielding gas | pre-heating | weld cracks | solidification cracks | solution cracks | weld imperfections | economy | distortion | inspection | non-destructive testing | destructive testing | quality control aspects | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4601: Introduction to Brazing of Aluminium Alloys

Description

This lecture describes the characteristics of brazing aluminium and the process involved; it helps to understand the use potential and the limitations of brazing aluminium. Basic knowledge of aluminium alloys designation system, surface treatment and corrosion behaviour is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | brazing | soldering | bonding | joint design | fixture design | pre-braze cleaning | oxide removal | brazeable alloys | torch brazing | flux-dip brazing | furnace brazing | vacuum brazing | controlled atmosphere brazingbrazing filler metals | fluxes | mechanical properties | brazed joints | microstructure | corrosion | quality control | non-destructive testing | assembly tests | destructive testing | automotive heat exchangers | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 5203: Anodizing of Aluminium

Description

This lecture describes the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium; it illustrates the weathering behaviour of anodized surfaces. Some familiarity with the subject matter covered in TALAT This lectures 5101- 5104 is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | surface treatment | European aluminium consumption | building applications | dimensional effects | anodizing | plating | painting | anodizing cell | anodic coating structure | cell dimensions | anodizing solutions | barrier type electrolytes | porous type electrolytes | film thickness | film weight | changes in current | changes in voltage | electrolyte temperature | current density | acid concentration | colouring anodized aluminium | dying | self colouring | integral colouring | electrolytic colouring | anodic films | sealing | properties | operational sequences | quality control | standards | EWAA - EURAS quality label | QUALANOD | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 5204: Organic Coating of Aluminium

Description

This lecture describes the different steps of the coating process and gives information about the test methods; it helps to select organic coatings for the protection of aluminium or to achieve specific surface properties. Some knowledge of corrosion protection and surface pretreatments of aluminium and familiarity with the subject matter covered in TALAT This lectures 5101, 5102, 5201, 5202 is assumed.

Subjects

aluminium | aluminum | european aluminium association | EAA | Training in Aluminium Application Technologies | training | metallurgy | technology | lecture | surface treatment | organic coating | painting | methods of application | surface preparation | pretreatment | powder coatings | paints | lacquers | electrophoretic coatings | primer | finishing paints | quality control | test methods | corematerials | ukoer

License

http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://core.materials.ac.uk/rss/talat.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

15.760B Introduction to Operations Management (MIT)

Description

This half-term course introduces students to problems and analysis related to the design, planning, control, and improvement of manufacturing and service operations. Class sessions involve explaining concepts, working examples, and discussing cases. A wide range of topics are covered, including: process analysis, quality management, supply chain design, procurement, and product development. Toward the end of the course, students work in teams to manage a virtual factory in a web-based simulation exercise.

Subjects

operations management | service operations | manufacturing design | manufacturing planning | production control | quality management | process design | reengineering | product development | project management | supply chain design | improving manufacturing processes | capacity | inventory | quality control | product design | factory management

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allpersiancourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Analytical Science

Description

Wales undergraduate level and as a CPD training resource

Subjects

ukoer | sfsoer | oer | open educational resources | metadata | analytical science | cpd training resource | analytical chemistry | measurement science | analytical process model | skills for analytical science | skills for analytical chemistry | analytical sample preparation | separation and concentration of analytes | units of measurement | volumetric techniques | gravimetric techniques | calibration methods | standard-addition | method of internal-standards | statistical analysis of data | measurement uncertainty | chromatographic methods | thin layer chromatography | gc | gas chromatography | hplc | high-performance liquid chromatography | capillary electrophoresis | potentiometry | ion-selective electrodes | amperometry | coulometry | plated film thickness | electromagnetic spectrum | electronic transitions | vibrational energy | comparison of spectroscopic techniques | fluorescence spectroscopy | mid infra-red spectroscopy | near infra-red spectroscopy | aas | atomic absorption spectroscopy | atomic emission spectroscopy | inductively coupled plasme emission spectroscopy | icpms | icpes | atomic fluorescence spectroscopy | comparison of elemental analysis techniques | principles of mass spectroscopy | electron impact mass spectroscopy | chemical ionisation mass spectroscopy | quadrupole mass spectroscopy | time-of-flight mass analysers | ion-trap mass analysers | off-line sampling systems | at-line sampling systems | on-line sampling systems | in-line sampling systems | performance characteristics of analytical techniques | flow injection analysis | fia | process gc | process ir | process ms | process uv/visible | quality management | quality assurance | qa | vam principles | quality control | qc | analytical method validation | analytical method performance characteristics | sampling of solids | liquids and gases | measurement of ph | karl fischer titration | uv/visible spectroscopy | beer's law | beer-lambert law | deviations from beer's law | mid ir spectroscopy | near ir spectroscopy | raman spectroscopy | fourier transform spectroscopies | x-ray methods | x-ray fluorescence spectroscopy | gc-ms | lc-ms | Physical sciences | F000

License

Attribution-Noncommercial-No Derivative Works 2.0 UK: England & Wales Attribution-Noncommercial-No Derivative Works 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-nd/2.0/uk/ http://creativecommons.org/licenses/by-nc-nd/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 2203: Structural materials fabrication

Description

This lecture gives a brief introduction into the basic fabrication methods for structural aluminium alloy materials with respect to machining, forming, joining and surface treatments as a necessary background for the design process; it describes the subject of welding structural aluminium alloys in order to understand the materials requirements which the designer has to take into account when designing load carrying welded aluminium structures. General materials engineering background is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | design | product | structural design | preparation | extrusion | cutting | plasma gas cutting | shearing | sawing | machining | cold forming | bending | cold forging | bolting | riveting | adhesive bonding | explosion welded connections | sandwich element construction | surface treatment | joining | chemical properties | physical properties | welding | inert gas welding | mig welding | pulsed arc mig welding | plasma mig welding | tig welding | filler materials | weldability | joint design | backing methods | cleaning | shielding gas | pre-heating | weld cracks | solidification cracks | solution cracks | weld imperfections | economy | distortion | inspection | non-destructive testing | destructive testing | quality control aspects | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 4601: Introduction to Brazing of Aluminium Alloys

Description

This lecture describes the characteristics of brazing aluminium and the process involved; it helps to understand the use potential and the limitations of brazing aluminium. Basic knowledge of aluminium alloys designation system, surface treatment and corrosion behaviour is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | joining | fastening | mechanical | brazing | soldering | bonding | joint design | fixture design | pre-braze cleaning | oxide removal | brazeable alloys | torch brazing | flux-dip brazing | furnace brazing | vacuum brazing | controlled atmosphere brazingbrazing filler metals | fluxes | mechanical properties | brazed joints | microstructure | corrosion | quality control | non-destructive testing | assembly tests | destructive testing | automotive heat exchangers | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 5203: Anodizing of Aluminium

Description

This lecture describes the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium; it illustrates the weathering behaviour of anodized surfaces. Some familiarity with the subject matter covered in TALAT This lectures 5101- 5104 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | surface treatment | european aluminium consumption | building applications | dimensional effects | anodizing | plating | painting | anodizing cell | anodic coating structure | cell dimensions | anodizing solutions | barrier type electrolytes | porous type electrolytes | film thickness | film weight | changes in current | changes in voltage | electrolyte temperature | current density | acid concentration | colouring anodized aluminium | dying | self colouring | integral colouring | electrolytic colouring | anodic films | sealing | properties | operational sequences | quality control | standards | ewaa - euras quality label | qualanod | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

TALAT Lecture 5204: Organic Coating of Aluminium

Description

This lecture describes the different steps of the coating process and gives information about the test methods; it helps to select organic coatings for the protection of aluminium or to achieve specific surface properties. Some knowledge of corrosion protection and surface pretreatments of aluminium and familiarity with the subject matter covered in TALAT This lectures 5101, 5102, 5201, 5202 is assumed.

Subjects

aluminium | aluminum | european aluminium association | eaa | talat | training in aluminium application technologies | training | metallurgy | technology | lecture | surface treatment | organic coating | painting | methods of application | surface preparation | pretreatment | powder coatings | paints | lacquers | electrophoretic coatings | primer | finishing paints | quality control | test methods | corematerials | ukoer | Engineering | H000

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

Quality Management

Description

In this lesson, we will be looking at defining and noting the difference between quality assurance and quality control. We will also evaluate methods used to maintain the quality of provision within a lifelong learning institution.

Subjects

defining quality control | verification and moderation | defining quality assurance | self-assessment reports (sars) | EDUCATION / TRAINING / TEACHING | G

License

Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales Attribution-Noncommercial-Share Alike 2.0 UK: England & Wales http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ http://creativecommons.org/licenses/by-nc-sa/2.0/uk/

Site sourced from

http://dspace.jorum.ac.uk/oai/request?verb=ListRecords&metadataPrefix=oai_dc

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

1.77 Water Quality Control (MIT)

Description

The course material emphasizes mathematical models for predicting distribution and fate of effluents discharged into lakes, reservoirs, rivers, estuaries, and oceans. It also focuses on formulation and structure of models as well as analytical and simple numerical solution techniques. Also discussed are the role of element cycles, such as oxygen, nitrogen, and phosphorus, as water quality indicators; offshore outfalls and diffusion; salinity intrusion in estuaries; and thermal stratification, eutrophication, and sedimentation processes in lakes and reservoirs. This course is a core requirement for the Environmental MEng program.

Subjects

water quality control | mathematical models | effluents | lakes | reservoirs | rivers | estuaries | oceans | element cycles | water quality indicators | offshore outfalls | diffusion | salinity intrusion | thermal stratification | eutrophication | sedimentation processes

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata

15.760B Introduction to Operations Management (MIT)

Description

This half-term course introduces students to problems and analysis related to the design, planning, control, and improvement of manufacturing and service operations. Class sessions involve explaining concepts, working examples, and discussing cases. A wide range of topics are covered, including: process analysis, quality management, supply chain design, procurement, and product development. Toward the end of the course, students work in teams to manage a virtual factory in a web-based simulation exercise.

Subjects

operations management | service operations | manufacturing design | manufacturing planning | production control | quality management | process design | reengineering | product development | project management | supply chain design | improving manufacturing processes | capacity | inventory | quality control | product design | factory management

License

Content within individual OCW courses is (c) by the individual authors unless otherwise noted. MIT OpenCourseWare materials are licensed by the Massachusetts Institute of Technology under a Creative Commons License (Attribution-NonCommercial-ShareAlike). For further information see https://ocw.mit.edu/terms/index.htm

Site sourced from

https://ocw.mit.edu/rss/all/mit-allcourses.xml

Attribution

Click to get HTML | Click to get attribution | Click to get URL

All metadata

See all metadata